7.6.22.4.3Transferring Oil Tank from Dolly to Transmitter Cabinet. - Proceed as follows:
 
 

Ensure that all hoses, cables, and wires are free and will not be damaged during placement of the oil tank assembly into the cabinet.

1. See figure 11-21, sheet 3, view D. Remove wheel stop pin and push klystron tube V1 and oil tank assembly A7 into transmitter cabinet until oil tank is seated against rear wheel stop.

2. Install wheel chocks on left front oil tank carriage wheel.

3. See figure 11-21, sheet 3, view E. Loosen wing nuts on dolly cabinet hooks, unhook dolly from cabinet, and roll dolly away from transmitter cabinet.